China wholesaler My-M011 Oil-Free Air Compressor Dental Equipment Price lowes air compressor

Product Description

This MY-M011  Oil-free air compressor is compressor air

Usage operation announcements
1. While using should will get empty to press the machine put on the neat ground, choosing possibly well ventilated good, the dust is small, small position in degree of humidity, in order to spread hot good, sprit source cleanness dry.
2. The usage checks to get empty to press before the machine spirit road has on to the stop, the each a just like is often the phenomenon empress, putting the power cable plug to AC outlet top( the A C outlet must connect the ground is good)that meet the request, getting empty to press the machine electrical engineering to start starting namely, the electromagnetism valve acts, closing to line up the air road, whole machine begins to work.
3 The manometer instructions the pressure goes up the tallest pressure of the enactment, the pressure controller breaks to open automatically, getting empty to press the machine Stop the work.

4 Connect the row spirit valve mouth to a lowest electric voltage for using spirit source equipments tube road, opening CZPT up spirit valve valve door can immediately starting providing to equipments spirit, being manometer instructioning pressure declining to the enactment dint, the pressure control shuts to match automatically, getting empty to press the machine to start afresh(the different from allest pressure value according to model number in value in lowest pressure all have set up before product a factory good, general circumstance bottom the customer do not want to adjust the initial value without authorization.

5 If the customer power supply electric voltage is low, did not attain the standard electric voltage value, can’t be strong to exercise to use, will damage to get empty to press the machine electrical engineering otherwise should another add the power supply the steady pressing the machine or adjust to press the machine, make an electric voltage for using attain the standard power supply electric voltage value.

6 Use in the process, get empty to press the machine save to will condense a little amount humidity in spirit bottle, so want to periodically drain, a the sort drains every week, before draining turn off first the power supply, open to line up the spirit valve a row do to save spirit bottle air, then turn to open to save the spirit a bottom fill to block up, after drining, turn the using then afresh.

7 Use the process inside, because having the dust in the air, so enter the spirit do away with the orotund machine request to wash every week, before washing turn off first the power supply, will away with orotund machine turn the bottom, then turn the bottom cleans with the clear water, rebind the good using then. (also can rep; Ace the new sea cotton)

Maintain with support
1. For insuring the safety, compressor work the hour strictlies forbid to touch on board any a piece.
2. This machine is for having no oil compressor, strictlying forbid to encourage the lubrication.
3. The environment temperature of this machine usage is 5° C~40°
4. Wash absoluteness can’t to whole on board sprinkle water the application to softly the cloth wipe the clean and the above dust, being careful to knock and break a piece.
5. Use to please cut off the power switch after completing.

SPECIFICATIONS

Supply Voltage: 220 V 50 Hz
Power: 545 W
Volume Flow Rate: 70 L/min
Start-up Pressure: 0.5 MPa
Capacity Discharge: 0.8 MPa
Air Container Volume: 32 L
Noise: 56~65 dB

Our Advantage :
1: For all your inquires about us or our products , we will reply you in detail within 24 hours.
2: We own professional team have professional attitude to recommend products and services.
3:One year free warranty , after it is still providing after-sales service .
4: We offer OEM services , Can print your own logo on the products .
5:We have very experienced engineers , can help you better use our products .

Certification: CE
Type: Oil-Free Air Compressor
Product Name: Oil-Free Air Compressor
Power: 545 W
Volume Flow Rate: 70 L/Min
Start-up Pressure: 0.5 MPa
Customization:
Available

|

air-compressor

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China wholesaler My-M011 Oil-Free Air Compressor Dental Equipment Price   lowes air compressorChina wholesaler My-M011 Oil-Free Air Compressor Dental Equipment Price   lowes air compressor
editor by CX 2023-05-24